(1) What is the name of the airport in Bhopal?
(2) On which of these rivers in Madhya Pradesh will you find the Chachai Falls?
(3) Who among the following writers belonged to the Chhayavaad school of writing?
(4) When was Chhattisgarh separated from Madhya Pradesh?
(5) In which of the following States are Garo and Khasi Tribes found?
(6) Who is our current Union Minister for Finance?
(7) Who has been recently appointed as the new Director General of National Disaster Response Force (NDRF)?
(8) ‘Sharad Joshi award’ is given for excellence in the field of______.
(9) Salar Jung Museum is located in ____
(10) Who was the founder of Ramakrishna Mission?
(11) Which Vitamin is provided by sunlight to the human body?
(12) Syed Haider Raza, who passed away recently, was a wellknown artist from which country?
(13) This is the longest tributary river of India
(14) The longest state highway of Madhya Pradesh is______
(15) Port Blair is situated in
(16) “Valley of Flowers” National Park is in the State of_____
(17) Which festival in Kerala is famous for boat race?
(18) Where is the headquarters of the Bureau of Police Research and Development (BPR&D) located?
(19) Mahatma Gandhi started his first Satyagraha on Indian soil in 1917 at
(20) Which place of Madhya Pradesh is called ‘Detroit of India’?
(21) Which country will be hosting the FIFA U17 World Cup, 2017?
(22) What is the annual dance festival at Khajuraho organised by Madhya Pradesh Adivasi Lok Kala Academy called?
(23) In Madhya Pradesh, which scheme is introduced to provide financial help to the poor, needy, destitute families for marrying off their daughters/widows/divorcees?
(24) Which is the capital of Jharkhand?
(25) Who among the following Nobel laureates is a champion in the fight against deforestation?
(26) The angle made by the face of the tool and the plane parallel to the base of cutting tool is called?
(27) Safety signs are _________
(28) The type of drill used in drilling hard material with high cutting speed is _________.
(29) Web chisels are used for separating metals after_____________.
(30) G-codes are also called as_____.
(31) The silicon carbide abrasive is chiefly used for grinding?
(32) You have to machine a flat surface on a work piece of two meters length. Which machine will you choose for this?
(33) The tooth thickness of rack is measured by?
(34) The surface cutting speed in cylindrical grinding varies from______________.
(35) Which one of the following clutch provides a positive drive?
(36) Which one of the following is an artificial abrasive?
(37) Surface plate is made out of______.
(38) Tool life is affected due to______.
(39) The tensile strength of metal is its ability to resist fracture when subjected to tensile loads, the tensile strength of metals are expressed in__________.
(40) Segmental chips are formed during machining of______________.
(41) The thickness of rack tooth of 2 mm will be_______.
(42) The tool post of a planning machine is mounted on______________.
(43) 2D control can be simultaneous feed only______.
(44) The axis of the plate cam blank and the end mill spindle should always remain _______________
(45) If the diameter of the hole is subject to considerable variation, then for locating in jigs and fixtures, the pressure type of locator used is______________.
(46) The depth of cut in drilling is __________ the drill diameter
(47) An ideal machining allowance for finishing boring will be_____.
(48) A taper ring gauge is used for checking _____.
(49) Which of the following parameters influence the axial feed rate in centreless grinding?
(50) Which is the correct expression for the unit of feed rate in milling?
(51) The purpose of the holes provided on the sides of the sine bar is to________.
(52) Function of a chip breaker in a tool is to_______.
(53) The least count of a vernier height guage is ________
(54) The primary function of the cam is to convert______.
(55) A traveling steady is fixed on the saddle of a lathe. What is the function of this travelling steady rest?
(56) Rough & finish boring operations are carried out to machine a hole in a milling machine, for rough boring, select______________.
(57) The frictional guide ways are of_________.
(58) The pattern on the surface caused by the movement of the cutting tool is called______________.
(59) In a bilateral system of tolerance, the tolerance is allowed on________.
(60) The accuracy of micrometers, calipers, dial indicators can be checked by a_________.
(61) Morse taper is one of the internationally accepted standard tapers. The morse taper are available in numbers from_____.
(62) A steel work piece of high tensile strength is to be machined with a HSS milling cutter, which one of the following rake angles is best suited for cutter?
(63) The sensitiveness of the spirit level depends upon _____.
(64) Any number of equal divisions can be obtained on milling machine by_________.
(65) Tool maker buĥons made of____.
(66) A product is said to have the quality when__________.
(67) The lip angle of a single point tool is usually______________.
(68) Clamps are used for the purpose of _____.
(69) The major load applied in Rockwell hardness testing in ‘B’ Scale is _______.
(70) Fixed type of snap gauges will have
(71) Hack saw frame is used to cut along with_____________.
(72) The cold chisels are made by____.
(73) The prick punch point angle is?
(74) The forms of spline are_____.
(75) Files are classified according to their _____________.
(76) Suitable machine tool for high speed parting off work on material like cemented carbide is _______.
(77) A jig is a special device which provides to ____.
(78) Soft jaws or vice clamps are used in the vice to hold_____________.
(79) The temperature to which a work piece is heated depends on the material & the type of forging process, the temperature range for forging low carbon steel is?
(80) The coordinate system in milling machine comprises_______.
(81) The error in squareness can be accurately determined by using _______.
(82) The fullers are used____.
(83) The cutting tool in a milling machine is mounted on______________.
(84) The function of the spindle in the vice is_____________
(85) The tool made of HSS wears out faster at_______________.
(86) A file removes the metal during________.
(87) The rear teeth of a broach_____________.
(88) Ratio of water to soluble oil to prepare coolant is
(89) The blank diameter used in thread rolling will be:
(90) Counter boring is done for________.
(91) When the cutting edge of the tool is dull, then during machining__________.
(92) Unequal Lip length in a drill causes
(93) The secondary clearance of the taper lead bevel is______.
(94) Tube micrometer used for measuring ____.
(95) C.N.C machine are not manually operated. They are controlled by means of________.
(96) A gear wheel has 36 teeth (z) and 3 mm module (m) its pitch diameter is_____.
(97) Thread grinding requires work speed from______________.
(98) To turn an external angle having 60 0 included angle, the compound slide to be set to _______.
(99) Hand file is also called as?
(100) A wrong way of lifting a heavy loads causes?
